| Customization: | Available |
|---|---|
| Power Supply: | Battery |
| Automation: | Automatic |
|
Still deciding? Get samples of US$ 5500/set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Part I: Introduce of the floor scrubber
J100S is a new design easy driving type floor scrubber. especially it has double working efficiency and more relaxed working environment. It adopts small body size and special steering wheel to ensure the manageability of working, it can be easy to bypass obstacles in small spaces and finish cleaning task in short time, save the cleaning cost greatly.
Part II: Advantage of floor scrubber
1. There is a strong water absorption system to clean the sewage completely. The built-in vacuum system, mechanical and vacuum cleaning system can clean all kinds of garbage. The double brush plate or large brush plate design can clean the ground more cleanly
2. It is many times as much as manual work. It can effectively save manual work in terms of cleaning, which is the most important advantage
3. Front seat, driving work, good vision, steering wheel, easy to operate. Effectively improve the image of the company
4. The mechanical parts are easy to disassemble and replace
5. It has heavy-duty steel chassis, durable tire and brake device. Safer and longer to use
6. Replaceable brush plate and needle plate, suitable for all ground use. For high-end and low-end ground, you can use the driving floor washer
7. The speed can be adjusted, and different solutions can be made for different environments to solve the cleaning problems
Part III: Datas of J100S floor scrubber
|
Brush Motor |
400*2w | Suction Motor | 600w |
| Propelling Motor | 400w | Driving Speed | 0-5km |
|
Cleaning Width |
760mm |
Suction Width |
1000mm |
| Working Time | 3-4h | Charging Time | 6-8h |
| Cleaning Efficiency | 4000m2/h | Brush Diameter | 380*2mm |
| Water Tank | 100L | Sewage Tank | 115L |
Part IV:Applicable floor materials
The floor scrubber applies to municipal building site,square,super market ,factories ,workshop and a variety of public places.
And can clen Terrazzo floor, PVC hard floor, Vitrified brick floor, Epoxy floor, Emery wear-resistant floor and concrete/cement floor etc..
Each machine is put on a polywood pallet, then carton;
Wooden box or air bubble film and carton for plastic products or as your request.
Normally, for testing sample, we can arrange the delivery within 7 days;
Part V: FAQ
Insufficient water on the brush plate
1. Check that the water valve is open
2. Check the amount of water in the clean water tank
3. Check whether the water filter is clean (if any)
4. Check whether the pipe conveying water to the brush plate is blocked
Incomplete machine cleaning
Check the wear of the brush discs and replace them if necessary (the brush discs should be replaced when the length of the bristles is less than 15mm). Replace it with another brush plate of the same specification. When cleaning on the real dirty ground, special brush plate should be used, which is specially provided according to the needs
The effect of water absorption is not good
1. Check whether the absorbent strip is clean. Is there any solid residue left in it
2. Replace the damaged adhesive tape. Adjust the angle of suction grill. For the correct use, the height of the suction grill should be adjusted according to the abrasion of the rubber strip; in the process of cleaning, the back rubber strip should be bent back 5mm in its length direction
3. Check whether the suction pipe has been correctly inserted into the inlet of the sewage tank
){kind=link}