Touch Free Automatic Car Washer Machine with Robot Arm

• Type: Mobile
• Application: Automotive Beauty Shop
• Fuel: Electric
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Fashion style
• Certification: CE
• Feature: Rust / Corrosion Inhibitor
• Function: Micro High Pressure Water Cleaning, High Power Vacuum, The Car Dry Cleaning
• Condition: New
• Power: Electricity
• Working Media: Water
• Operation: Full Automatic
• Save Labor: Yes
• Transport Package: Wooden Case
• Specification: Automatic Touch Free Car Wash Equipment
• Trademark: Pivot
• Origin: China
• HS Code: 8479819000
• Production Capacity: 500000

Product Description

Part I: Introduce of the Car Washer Machine

This type Touch free car wash machine has the function of Chassis flushing, Foam spray, Foam Delay, High pressure flushing, Car washing mode selection, Car model selection, Automatic proportioning, Light prompt, Energy saving system, Mechanical pressure regulation, Electronic collision avoidance, Fault self check, Automatic detection by the conductor, Embedded automatic air drying, etc..

Part II:  Equipment delivery list

1) Crane main engine	2) Water pump main engine sealing ring
3) 2 inch water inlet pipe for 1 pc	4) 1 rotary pneumatic valve short rod
5) 4-point throat hoop for 2 pc	6) Water return pipe for 1 pc
7) One crown block cover and 1 pc electric control box	8) Rocker arm with shield
9) Rocker arm hoop for 2 pcs	10) One right angle iron for 1 p
11) pieces of 100 channel steel	12) 4 pcs of u-wires
13) Site cleaning and shield	14) 2 pcas of fixing pieces
The limit iron is 2 pcs of long and 15 pcs of short	4 sets of crown block fasteners (12 pieces)
12 sets of shelf fasteners (24 pieces)	4 pcs Foundation iron
2 sets of fastener for vertical pole	One inch galvanized pipe 3m*3, 2.5m*1,1.2m*1 500mm*2
One inch pipe fitting, 12 pipe hoops, 10 ball head sealing rings	High pressure hydraulic pipe 1m*3,2m*2, 5 ball heads, 16 tubes 20m, 8mm tubes 50m
12*120 screws 115 pcs, 12*90 screws 18 pcs	10*10 expansion screws 22pcs, 1 proximity switch (standby)
Expansion screw in construction site for 10 pcs	1 bag of ribbon, 5 rolls of raw material belt, some hemp rope, 1 red and green indicator light (with accessories)
There are 2 pairs of photoelectric switches, 4 ps photoelectric supports, 8 pcs 30o rings and 1 roll of electrical tape	2-core shielded wire 20m, 6-core 0.75 wire 20m, 8-core 0.75 wire 20m
Three core 0.75 wire 60m (single 20m), two core 0.75 wire 15m	Water pump control line 4-core 15m
There are 8 screws with 15 sets of nut + flat pad + spring pad, and 6 screws with 15 sets of nut + flat pad + spring pad	Water pump motor cable 15 meters 4 square, 5 screws and nuts + flat pad + spring pad with 15 sets
Foam barrel 1, car wash agent 2 bags.

Part III: Datas of P10 Car Wash Equipment

Material	Stainless steel	Foam system	1 set
Water consumption	80-120L	Chassis side spray	1 set
High Pressure Pump	7.5kw	Control mode	Touch screen operation
Car wash size	530*190*200cm	Car washing method	Cantilever 360 degree encircling type
Body sensing	ultrasonic	Car wash time	3 minutes
Fault self check	Automatic alarm	Storage capacity	More then 1t
Water supply	Pipeline with more than 6 points	Pressure	60-80kg
Air pump power	More than 700w	main controller	Schneider, Chint
Induction mode	Ultrasonic induction, electro-optic induction, proximity induction	Foam power	370w
Operation mode	Manual, automatic and continuous automatic	Protection system	Over voltage protection, over current protection
Car washing process	Chassis + foam + rinse	Color touch screen	1 set

Part IV: Washing mode
1. Chassis wash
2. Spray Shampoo
3. 360 degree high pressure water wash
4. Spray water wax
5. Air dry


Part V: FAQ

1. What's time cost for complete fine wash of Automatic touchless car wash machine ?
running one circle spend 28 seconds, complete fine wash with high pressure water spray, wax, foam and air drying totally cost about 5 mins.

2. How about the air drying result ?
Uses design of air fluid mechanics principle to achieve long-distance high-pressure air cylinder, can reach 90% drying result, the stability with safety are much more better than the profiling air drying in brush wash machine.

3. What's the cost for wash one car ?
For example in our city, water with electricity cost for one car is about 1.5 RMB, chemicals cost about 1 RMB, total 2.5. RMB equals USD0.45

4. What's power supply required for running Automatic touchless car wash machine ?
Car wash machines require 3 phase industry power supply, in China the standard is 380V/50Hz, if customer
require different voltage or frequency, we have to customize motors from Siemens company, and change accordingly fans, low-voltage electrical cables, control units, etc.

5. How to make installation and after sale service for pivot?
* If there's an exclusive distributor available in your region, you need to buy from distributor and distributor will support your installation, training and after sale service.
* If a distributor can't be found in your region, we can dispatch technician to support your installation and training, but the traveling expense should be on customer's account, this will include visa cost, air tickets cost, hotel with restaurant cost, and customer need to pay for technician salary USD100/day.

6. What's the warranty of  Automatic touchless car wash machine ?
We offer 3 years extended warranty for complete machine, all spare parts included, within warranty period, if any parts break down, we will compensate new parts at free charge, but warranty doesn't cover courier expense. 

7. What is leading time of car wash equipment systems ?
If customer requires same as China standard three phase industry voltage 380V/50Hz, we can provide fast delivery within 7~10 days, if different with China standard, the delivery schedule will prolong 30 days.