| Customization: | Available |
|---|---|
| Power Supply: | Battery |
| Automation: | Automatic |
|
Still deciding? Get samples of US$ 5500/set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. In terms of operation mode, it is similar to business car but more convenient and comfortable.
2. The machine has new denoising structure to reduce noise pollution by controlling the noise level under 70db.
3.The machine is equipped with soft chair in accordance with ergonomics.
4.The brush can be assembled and disassembled automatically. Press removing brush button to disassemble brush. On the other hand, push the brush under the proper position firstly, and then press the assembling brush button to complete brush assembling.
5.The machine has automatic and manual operation mode. Under the automatic mode, all the function works by stepping on the accelerator. Otherwise, each function can also be operated by hands singly.
6.The capacity of the solution tank is 100L, the capacity of the recovery tank is 115L.Therefore, it reduces times of changing water and raise working efficiency.
7.The squeegee is installed through a clasp. Release the squeegee clasp to change squeegee assembly.
Part II: Advantage of floor scrubber
1. European style, ergonomic design, simple and elegant.
2. Adjustable blade, good water absorption effect, convenient disassembly.
3.Intelligent control system ensure comfortable and safe operation and stable.
4.Design of automatic loading and unloading brushing plate which is convenient for use.
5.Big capacity tank & wide brush width make cleaning more efficient.
6.Maintenance free battery can guarantee longer working life.
7.Imported vacuum motor ensures high dry performance.
8.Low-noise, can be used in hospitals and other quiet environments.
9.Imported water absorption strip with better water absorption effect.Part III: Datas of J100S floor scrubber
|
Brush Motor |
400*2w | Suction Motor | 600w |
| Propelling Motor | 400w | Driving Speed | 0-5km |
|
Cleaning Width |
760mm |
Suction Width |
1000mm |
| Working Time | 3-4h | Charging Time | 6-8h |
| Cleaning Efficiency | 4000m2/h | Brush Diameter | 380*2mm |
| Water Tank | 100L | Sewage Tank | 115L |
Part IV:Applicable floor materials
The floor scrubber applies to municipal building site,square,super market ,factories ,workshop and a variety of public places.
And can clen Terrazzo floor, PVC hard floor, Vitrified brick floor, Epoxy floor, Emery wear-resistant floor and concrete/cement floor etc..
Each machine is put on a polywood pallet, then carton;
Wooden box or air bubble film and carton for plastic products or as your request.
Normally, for testing sample, we can arrange the delivery within 7 days;
Part V: FAQ
Insufficient water on the brush plate
1. Check that the water valve is open
2. Check the amount of water in the clean water tank
3. Check whether the water filter is clean (if any)
4. Check whether the pipe conveying water to the brush plate is blocked
Incomplete machine cleaning
Check the wear of the brush discs and replace them if necessary (the brush discs should be replaced when the length of the bristles is less than 15mm). Replace it with another brush plate of the same specification. When cleaning on the real dirty ground, special brush plate should be used, which is specially provided according to the needs
The effect of water absorption is not good
1. Check whether the absorbent strip is clean. Is there any solid residue left in it
2. Replace the damaged adhesive tape. Adjust the angle of suction grill. For the correct use, the height of the suction grill should be adjusted according to the abrasion of the rubber strip; in the process of cleaning, the back rubber strip should be bent back 5mm in its length direction
3. Check whether the suction pipe has been correctly inserted into the inlet of the sewage tank
){kind=link}