Part I: Introduction of Floor Scrubber
This floor scrubber is a kind of equipment suitable for cleaning hard floors while absorbing and reclaiming sewage. It has the advantages of environmental protection, energy saving, high efficiency, and quietness. It is widely used in hotels, shopping malls, supermarkets, stores and restaurants, etc, especially for small area.
Part II: Application of PA350 Floor Scrubber
1. This type Floor Scrubber is powerful, and capable of cleaning requirements in the industrial environment of heavy oil.
2. Besides, it can be used to clean tile floors, stone floors, epoxy floors, emery floors, terrazzo floors, plastic floors, PVC floors, cement floors, etc. Clean oil, sludge, dirt and dust on hard floors.
3. It is mainly used in shopping center, departure hall, factory, logistics warehouse and son on.
Part III: Features of floor scrubber
-The type can be used in the noise-sensitive environment, and lower noise than similar products by 55%.
-The fuselage structure is solid. And the design of body engineering prevents fatigue and makes cleaning a snap.
-The circular design of squeegee system can full reclaim the sewage in the case of 180°turn.
-The perfect cleanout view and simple control panel enable the operators to concentrate on cleaning up the environment.
-The skirt-board of brush effectively prevent the water and detergent spill chaos and 50% of them saved.
-The squeegee blades can be changed quickly without tools, wear-resistant and durable.
-The dexterous and compact design makes the machine can be used fluently even in a crowded environment.
Part VI: FAQ
Q:Why does the brush not turn?
A: check that the brush master switch is on.
Q: Why is the machine running for a short time?
A: 1. A fully charged machine can operate for 3.5-4 hours.
2. Charge for at least 8 hours.
3. Please contact the after-sales center to solve the problem if it can not operate for 1.5 hours after being fully charged.
Q: Why does the charger not work?
A: 1. Connect the charger to the battery connector.
2. Plug the charger into the power supply.
3. The ammeter pointer should move and the charging lamp should flash.
4. If the above instructions are invalid, please contact the after-sales Center for solution.
Audited Supplier 
){kind=link}
){kind=link}