360 Full Automatic Single Arm Contactless Car Washing Equipment with Dryer for Sale

• Customization: Available
• Type: Mobile
• Application: Automotive Beauty Shop
• Model NO.: P10
• Fuel: Electric
• Certification: CE
• Feature: Rust / Corrosion Inhibitor
• Function: Micro High Pressure Water Cleaning, High Power Vacuum, The Car Dry Cleaning
• Condition: New
• Power: Electricity
• Working Media: Water
• Operation: Full Automatic
• Save Labor: Yes
• Transport Package: Wooden Case
• Specification: Automatic Touch Free Car Wash Equipment
• Trademark: Pivot
• Origin: China
• HS Code: 8479819000
• Production Capacity: 500000

Product Description

Part I: Advantages of the Car Washer Machine

1.360 degrees Rotating arm , clean the car body at the maximum Angle,  clean the blind area  thoroughly

2.Voice broadcast, LED screen instruction,  guide vehicles to appropriate cleaning position, then start. Otherwise, the machine will not work.

3.Remote control. Each machine is equipped with remote control, which can perform remote one-key operation, convenient and easy to operate.

4.Rinse the front and rear of the car repeatedly. Wash the dirty front hood and rear of the car repeatedly

5.Automatically identify the reflector position and flush .

Part II:  Equipment delivery list

1) Crane main engine	2) Water pump main engine sealing ring
3) 2 inch water inlet pipe for 1 pc	4) 1 rotary pneumatic valve short rod
5) 4-point throat hoop for 2 pc	6) Water return pipe for 1 pc
7) One crown block cover and 1 pc electric control box	8) Rocker arm with shield
9) Rocker arm hoop for 2 pcs	10) One right angle iron for 1 p
11) pieces of 100 channel steel	12) 4 pcs of u-wires
13) Site cleaning and shield	14) 2 pcas of fixing pieces
The limit iron is 2 pcs of long and 15 pcs of short	4 sets of crown block fasteners (12 pieces)
12 sets of shelf fasteners (24 pieces)	4 pcs Foundation iron
2 sets of fastener for vertical pole	One inch galvanized pipe 3m*3, 2.5m*1,1.2m*1 500mm*2
One inch pipe fitting, 12 pipe hoops, 10 ball head sealing rings	High pressure hydraulic pipe 1m*3,2m*2, 5 ball heads, 16 tubes 20m, 8mm tubes 50m
12*120 screws 115 pcs, 12*90 screws 18 pcs	10*10 expansion screws 22pcs, 1 proximity switch (standby)
Expansion screw in construction site for 10 pcs	1 bag of ribbon, 5 rolls of raw material belt, some hemp rope, 1 red and green indicator light (with accessories)
There are 2 pairs of photoelectric switches, 4 ps photoelectric supports, 8 pcs 30o rings and 1 roll of electrical tape	2-core shielded wire 20m, 6-core 0.75 wire 20m, 8-core 0.75 wire 20m
Three core 0.75 wire 60m (single 20m), two core 0.75 wire 15m	Water pump control line 4-core 15m
There are 8 screws with 15 sets of nut + flat pad + spring pad, and 6 screws with 15 sets of nut + flat pad + spring pad	Water pump motor cable 15 meters 4 square, 5 screws and nuts + flat pad + spring pad with 15 sets
Foam barrel 1, car wash agent 2 bags.

Part III: Datas of P10 Car Wash Equipment

Material	Stainless steel	Foam system	1 set
Water consumption	80-120L	Chassis side spray	1 set
High Pressure Pump	7.5kw	Control mode	Touch screen operation
Car wash size	530*190*200cm	Car washing method	Cantilever 360 degree encircling type
Body sensing	ultrasonic	Car wash time	3 minutes
Fault self check	Automatic alarm	Storage capacity	More then 1t
Water supply	Pipeline with more than 6 points	Pressure	60-80kg
Air pump power	More than 700w	main controller	Schneider, Chint
Induction mode	Ultrasonic induction, electro-optic induction, proximity induction	Foam power	370w
Operation mode	Manual, automatic and continuous automatic	Protection system	Over voltage protection, over current protection
Car washing process	Chassis + foam + rinse	Color touch screen	1 set

Part IV: Features of P10 Car Wash Equipment
1. Powerful automatic detection, early warning, safe and reliable

7 type arm touchless car washing machine ,  USES multiple intelligent ultrasonic detection systems to automatically detect the length and width of the vehicle, adjust according to the detection data. It always keeps a distance of 20-25cm from the  machine body. Before operation, all the sensing, motion and control modules will be scanned for safety detection, hidden dangers will be found in advance. Power supply, undervoltage, overvoltage and overload will be monitored in real time. High-power motor also adopts advanced thermal detection technology.

2. 360 degrees Rotating arm, wash a car as soon as 100 seconds, fully reduce the washing cost

The 7-arm flagship machine, uses the same nozzle to spray and spray various car wash liquid, with different pipes, automatically exchange, and reasonable design. It can  liquefy  a variety of car shampoo into mist,  evenly spray to various parts  of the body .Through the most advanced high-precision ratio technology, accurate measurement system , it can achieve better results with less  dosage.

3. Car wash procedures are divided into standard cleaning and Fine armor cleaning.
Fine armor to wash: The cleaning and glazing is completed synchronously, at the same time of cleaning, the magic color glazing is completed synchronously to make the paint surface color more bright and beautiful. Besides, added a kind of crystal coating wax water,  it achieves the function of super protective paint, acid rain prevention, pollution prevention, uv erosion prevention.

Part V: Washing mode
1. Chassis wash
2. Spray Shampoo
3. 360 degree high pressure water wash
4. Spray water wax
5. Air dry


Part VI: FAQ

A. What's time cost for complete fine wash of Automatic touchless car wash machine ?
Running one circle spend 30-45 seconds, complete fine wash with high pressure water spray, wax, foam and air drying totally cost about 5 mins.

B. How about the air drying result ?
Uses design of air fluid mechanics principle to achieve long-distance high-pressure air cylinder, can reach 90% drying result, the stability with safety are much more better than the profiling air drying in brush wash machine.

C. What's the cost for wash one car ?
For example in our city, water with electricity cost for one car is about 1.5 RMB, chemicals cost about 1 RMB, total 2.5 RMB equals USD0.45

D. What's power supply required for running Automatic touchless car wash machine ?
Car wash machines require 3 phase industry power supply, in China the standard is 380V/50Hz, if customer require different voltage or frequency, we have to customize motors from Siemens company, and change accordingly fans, low-voltage electrical cables, control units, etc.

E. How to make installation and after sale service for machine ?

1) Professional installation Videos. 

First , We will offer our customer building installation clearly videos , 
This videos clearly teach our customer's how to installation , and will clarify how each step of the machine is installed;
(1) Our customer's can use our videos , To installation the machine by self 

(2) local worker to installation the machine 
If local worker has any doubt in installation process , We professional worker will use the social app directly open the video , Talking them how to solve them doubt.;
 
2)Door to door Service ;

We offer the installation machines door to door service,
Our professional worker will go to customer's address , Directly to help them to installation machines 
 
3)Come our factory study the installation Skill ;
Because the machine installation involves a lot of professional skills , We welcome our customer's come our factory first ; 
On the one hand 

We sincerely welcome our customers can come china , Feel the real traditional culture , And knowing our factory real produce situations ; We can introduce our various of machines to our customers ,What types machine suit them market ; 
On the other hand 

We directly teach our customer's how to installation the machines 
Because our professional worker can directly communication face to face 
That is best ways , To help our customer's save the cost , Save the time 
We offer the free accommodation cost /air tickets cost etc

G. What's the harmonization system code of the car wash system ?
HS code: 8424899990

Part VII: Our Service
1. Provide plant layout and peripheral equipment configuration for new customers, make the machine more reasonable installation, safety.

2. Install and adjust machine for customer , also train worker how to operate and solve normal trouble . 

3. After-sale service department and branch office will provide  professional service for customer ,make sure machine normal working .

4. Preventive maintenance: After-sale engineer will not regularly visit customers , give advice according to machine use, maintenance and adjustment etc. .

5. We will provide various training ,to teach customer how to operate  machine well ,and also organize many communication meetings of    technolog