Commercial Large Ultra-Silence Ride on Cement Floor Dust Cleaning Machine Scrubber Dryer / Electric Floor Cleaning Machine

• Power Supply: Battery
• Automation: Automatic
• Operation Type: Ride-on Scrubber
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 160S
• Brush Hardness: Medium Hardness
• Brush Structure: Disc Type
• Control: Artificial
• Application: Store
• Certification: CE
• Floor Material: Epoxy
• Condition: New
• Customized: According to Customer′s Request
• Transport Package: Wooden Box
• Specification: Cleaning efficiency: 5000m2/h
• Trademark: Pivot
• Origin: China
• HS Code: 8479899990
• Production Capacity: 60000PCS/Year

Product Description

Part I: How to use the floor scrubber?

1. The function buttons are complete, the touch control is flexible, the operation is simple and convenient, and the working time of the LCD panel screen display motor is controlled.

2. Brush plate sucking up adopt automatic lifting function, sucking up automatically when reversing, effectively protecting water sucking up.

3. The absorption motor adopts that shutdown function with a delay of 5 seconds to prevent the back flow of sewage.

4. Intelligent water quantity sensing system. When the sewage tank is full or the clear water tank is empty, the motor stops working automatically, effectively prolonging the service life of the motor and improving the working efficiency.

5. 35% of working efficiency will be easily improved by super large water tanks of 160L solution tank and 180L recovery tank.
Part II: Features of floor scrubber

-A new ergonomic design of the steering wheel, the operator can easily drive to complete cleaning.

-While the equipment is turned, intelligent control system automatically reduce speed, which further improve security.

-Intelligent sensing system of water, brush and water absorption system for full protection.

-Ultra compact body design, even in small of difficult to access areas you can also easily work.

-Adding liquid system-a moment operations under efforts to clean the dirty ground level select the most appropriate.

-Grand opening of the dumping of recovery tank, facilitate the thorough cleaning of slop tank.
Part III: Datas of 160S floor Scrubber

Brush Motor	500*2w	Suction Motor	600w
Propelling Motor	650w	Driving Speed	0-5km
Cleaning Width	900mm	Suction Width	1150mm
Working Time	3-4h	Charging Time	6-8h
Cleaning Efficiency	5000m2/h	Brush Diameter	450*2mm
Water Tank	160L	Sewage Tank	180L

Part IV: Applicable floor materials

The floor scrubber can be used widely in supermarkets, factory, workshops, subway stations, school, warehouse, and other pleace.

It can clean up the round that needs cleaning at one time, which can greatiy improve the efficiency of work.

Part V: Package and Delivery

Each machine is put on a polywood pallet, then carton;

Wooden box or air bubble film and carton for plastic products or as your request.

Normally, for testing sample, we can arrange the delivery within 7 days;


Part VI: FAQ

Q: Why are water stains left on the ground?
A: 1. Whether the cleaned ground belongs to soft ground.
2. Check whether there is any foreign matter between the two suction strips.
3. Check whether the water absorption rubber strip is worn.
4. Check whether the suction grill is adjusted correctly.

Q: Why is the water absorption function of the floor scrubber poor?
A: 1. The cover of the sewage tank is tightly locked.
2. The cover of the sewage drain is locked.
3. Check and make sure the suction pipe is clean and not blocked.
4. Check that the tape is real and touching the floor.
5. If the rubber strip is not sharp enough, please use the sharp edge of it to be at the outer end.

Q: Why are watermarks after cleaned?
A: 1. Wipe the dirt on the water absorption rubber strip with a cloth.
2. Check that the edge of the adhesive strip is sharp and does not change.

Q:Why does the floor scrubber not come out of water?
A: 1. Check and make sure that the water size regulating lever key has been turned on.
2. Check and confirm that there is water in the clean water tank.
3. Check that the clean water filter screen is clean.